HANNA® instruments Catálogo General v38

Specifications HI8936AN HI8936ALN HI8936BN HI8936BLN HI8936CN HI8936CLN HI8936DN HI8936DLN Range 0.0 to 199.9 mS/cm 0.00 to 19.99 mS/cm 0 to 1999 µS/cm 0.0 to 199.9 µS/cm Resolution 0.1 mS/cm 0.01 mS/cm 1 µS/cm 0.1 µS/cm Accuracy ±2% f.s. (excluding probe error) Calibration manual, two point, with offset and slope trimmers Temperature Compensation fixed or automatic with NTC sensor from 0 to 50°C (32 to 122°F) with β=2%/°C Conductivity Probe HI7635 for in-line applications (not included) Recorder Output 4-20 mA, not isolated, max 500 Ohm Protection IP65 Power Supply without LCD: 12-30 VDC; with LCD: 17-36 VDC LCD Display HI8936AN: no HI8936ALN: yes HI8936BN: no HI8936BLN: yes HI8936CN: no HI8936CLN: yes HI8936DN: no HI8936DLN: yes Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing Dimensions 165 x 110 x 71 mm (6.5 x 4.3 x 2.8’’) Weight 1 kg (2.2 lb.) Ordering Information All HI8936 models are supplied complete with instructions. AN, BN, CN, and DN without LCD ALN, BLN, CLN, and DLN with LCD HI8936 Series Conductivity Transmitters to use with Four-ring Probe • ATC · Automatic temperature compensation • Backlight · Backlit, LCD display HI8936 is a conductivity transmitter that utilizes a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. This allows the transmitterto operate at peak performance at all times. Temperature effects are compensated for by utilizing both the built-in temperature sensor on the probe and the transmitter’s ATC circuitry with a � of 2%/°C. Direct connection of the probe to the transmitter assures a positive electrical connection with no signal loss over long distances. HI8936 ”L” versions allow easy verification and monitoring of measured values and is easier to calibrate and maintain. The HI8936 series requires external power to the 4-20 mA current loop. The HI8936 series should be used in conjunction with the HI7635 in-line probe or HI7638 platinum probe (see Process Electrodes and Probes). EC solutions begin on page 5.34 15 Process Instrumentation 15.107 www.hannainst.com | transmitters

RkJQdWJsaXNoZXIy MTI3NTM=